Foot Pedal Settings - Revision history

MRWikiAdmin at 11:30, 29 May 2023

2023-05-29T11:30:30Z

← Older revision		Revision as of 11:30, 29 May 2023
Line 7:		Line 7:
	There are two ways that foot pedals can be used:		There are two ways that foot pedals can be used:
	[[File:Foot Pedal Settings.png\|thumb\|541x541px\|Image 1 - Foot Pedal Settings]]		[[File:Foot Pedal Settings.png\|thumb\|541x541px\|Image 1 - Foot Pedal Settings]]
	#~~Connected~~ in the Bluetooth ~~settings~~ of your system or connected to USB port. This depends on the pedal, so check which is supported. For these pedals you need to make sure they are in the right mode:		#First there is the '''Normal Pedal (HID)''' mode. With this mode, the pedal is connected in the '''Bluetooth Settings''' of your system or simply connected to USB port. This depends on the pedal, so check which is supported. For these pedals, you need to make sure they are in the right mode:
	#*On iOS and Android we recommend to use mode that sends arrow keys (←↑→↓) as a keyboard. Most cases this is called iOS/Android or page up/down mode. Check the manual of the pedal to be sure which mode / profile it is. Important! On iOS this is always the only mode that will work.		#*On iOS/iPadOS and Android, we recommend to use mode that sends arrow keys (←↑→↓) as a keyboard. Most cases, this is called iOS/Android or page up/down mode. Check the manual of the pedal to be sure which mode / profile it is. <u>Important! On iOS / iPadOS this is always the only mode that will work.</u>
	#*For Windows and ~~Mac OS~~ you can use both arrow keys (←↑→↓) mode and page-up/down mode. Check the manual of the pedal to be sure which mode ~~send~~ these keys.		#*For Windows and macOS, you can use both arrow keys (←↑→↓) mode and page-up/down mode. Check the manual of the pedal to be sure which mode sends these keys.
	#For AirTurn Pedals you can also ~~you~~ App Direct (GATT) mode. If ~~you~~ pedal is in this mode then you can connect it using the Foot Pedal Settings inside MusicReader.		#For AirTurn Pedals, you can also use '''App Direct (GATT)''' mode. If your pedal is in this mode, then you can connect it using the Foot Pedal Settings inside MusicReader. Important! App Direct is only available on iOS/iPadOS and Android. On Windows/Mac, you need to use '''Normal Pedal (HID)''' .


	The foot pedal settings inside MusicReader are shown in '''Image 1''':		The foot pedal settings inside MusicReader are shown in '''Image 1''':
	*With '''(1)''' and '''(2)''' you can set the pedal support to Normal Pedal (HID) or ~~AirTurn~~ App Direct. After doing that you press "Connect Pedal" '''(3)''' for connecting the foot pedal.		*With '''(1)''' and '''(2)''' you can set the pedal support to Normal Pedal (HID) or App Direct. After doing that, you press "Connect Pedal" '''(3)''' for connecting the foot pedal.
	*After you have connected the pedal be sure to set the right number of pedals. '''(4)''' This makes sure you have the right number of actions available.		*After you have connected the pedal, be sure to set the right number of pedals '''(4)''' This makes sure you have the right number of actions available.
	*Then you can select the actions for the pedals '''(5)''' '''(6)'''. By default they are set to page turning.		*Then you can select the actions for the pedals '''(5)''' '''(6)'''. By default, they are set to page turning.
	*~~Last~~ available ~~settings~~ is Pedal Block Time. '''(7)''' This setting is to ~~pevent~~ accidental double triggers. To do this the pedal is blocked for a short time after you press. Here you can set the time for that. If you set it to 0 then the block is turned off.		*The last available setting is Pedal Block Time. '''(7)''' This setting is to prevent accidental double triggers. To do this, the pedal is blocked for a short time after you press. Here you can set the time for that. If you set it to 0 then the block is turned off.
	[[Category:Documentation]]		[[Category:Documentation]]

MRWikiAdmin at 16:12, 17 June 2022

2022-06-17T16:12:26Z

← Older revision		Revision as of 16:12, 17 June 2022
Line 3:		Line 3:
	By default foot pedals trigger page turns in MusicReader, both forward and backwards.		By default foot pedals trigger page turns in MusicReader, both forward and backwards.

	~~Both~~ USB and Bluetooth foot pedals are supported.		In MusicReader both USB and Bluetooth foot pedals are supported.

	There are two ways that foot pedals can be used:		There are two ways that foot pedals can be used:
	[[File:Foot Pedal Settings.png\|thumb\|~~417x417px~~\|Image 1 - Foot Pedal Settings]]		[[File:Foot Pedal Settings.png\|thumb\|541x541px\|Image 1 - Foot Pedal Settings]]
	#Connected in the Bluetooth settings of your system or connected to USB port. This depends on the pedal, so check which is supported. For these pedals you need to make sure they are in the right mode:		#Connected in the Bluetooth settings of your system or connected to USB port. This depends on the pedal, so check which is supported. For these pedals you need to make sure they are in the right mode:
	#*On iOS and Android we recommend to use mode that sends arrow keys (←↑→↓) as a keyboard. Most cases this is called iOS/Android or page up/down mode. Check the manual of the pedal to be sure which mode / profile it is. Important! On iOS this is always the only mode that will work.		#*On iOS and Android we recommend to use mode that sends arrow keys (←↑→↓) as a keyboard. Most cases this is called iOS/Android or page up/down mode. Check the manual of the pedal to be sure which mode / profile it is. Important! On iOS this is always the only mode that will work.
Line 16:		Line 16:
	*With '''(1)''' and '''(2)''' you can set the pedal support to Normal Pedal (HID) or AirTurn App Direct. After doing that you press "Connect Pedal" '''(3)''' for connecting the foot pedal.		*With '''(1)''' and '''(2)''' you can set the pedal support to Normal Pedal (HID) or AirTurn App Direct. After doing that you press "Connect Pedal" '''(3)''' for connecting the foot pedal.
	*After you have connected the pedal be sure to set the right number of pedals. '''(4)''' This makes sure you have the right number of actions available.		*After you have connected the pedal be sure to set the right number of pedals. '''(4)''' This makes sure you have the right number of actions available.
	*Then you can select the actions for the pedals '''(5) (6)'''. By default they are set to page turning.		*Then you can select the actions for the pedals '''(5)''' '''(6)'''. By default they are set to page turning.
	*Last available settings is Pedal Block Time. '''(7)''' This setting is to pevent accidental double triggers. To do this the pedal is blocked for a short time after you press. Here you can set the time for that. If you set it to 0 then the block is turned off.		*Last available settings is Pedal Block Time. '''(7)''' This setting is to pevent accidental double triggers. To do this the pedal is blocked for a short time after you press. Here you can set the time for that. If you set it to 0 then the block is turned off.
	[[Category:Documentation]]		[[Category:Documentation]]

MRWikiAdmin at 09:15, 19 April 2022

2022-04-19T09:15:27Z

← Older revision		Revision as of 09:15, 19 April 2022
Line 18:		Line 18:
	*Then you can select the actions for the pedals '''(5) (6)'''. By default they are set to page turning.		*Then you can select the actions for the pedals '''(5) (6)'''. By default they are set to page turning.
	*Last available settings is Pedal Block Time. '''(7)''' This setting is to pevent accidental double triggers. To do this the pedal is blocked for a short time after you press. Here you can set the time for that. If you set it to 0 then the block is turned off.		*Last available settings is Pedal Block Time. '''(7)''' This setting is to pevent accidental double triggers. To do this the pedal is blocked for a short time after you press. Here you can set the time for that. If you set it to 0 then the block is turned off.
			[[Category:Documentation]]

MRWikiAdmin at 10:07, 15 April 2022

2022-04-15T10:07:52Z

← Older revision		Revision as of 10:07, 15 April 2022
Line 3:		Line 3:
	By default foot pedals trigger page turns in MusicReader, both forward and backwards.		By default foot pedals trigger page turns in MusicReader, both forward and backwards.

			Both USB and Bluetooth foot pedals are supported.

	~~MusicReader supports~~ two ~~types~~ of ~~foot~~ pedals:		There are two ways that foot pedals can be used:
			[[File:Foot Pedal Settings.png\|thumb\|417x417px\|Image 1 - Foot Pedal Settings]]
			#Connected in the Bluetooth settings of your system or connected to USB port. This depends on the pedal, so check which is supported. For these pedals you need to make sure they are in the right mode:
			#*On iOS and Android we recommend to use mode that sends arrow keys (←↑→↓) as a keyboard. Most cases this is called iOS/Android or page up/down mode. Check the manual of the pedal to be sure which mode / profile it is. Important! On iOS this is always the only mode that will work.
			#*For Windows and Mac OS you can use both arrow keys (←↑→↓) mode and page-up/down mode. Check the manual of the pedal to be sure which mode send these keys.
			#For AirTurn Pedals you can also you App Direct (GATT) mode. If you pedal is in this mode then you can connect it using the Foot Pedal Settings inside MusicReader.

	* ~~Keyboard /~~ HID ~~based~~ foot pedals. ~~These send arrow~~ () ~~or page up/down keys of your keyboard and are connected using~~ the ~~Bluetooth settings~~ of ~~your system~~. ~~Most~~ pedals ~~support this by~~ default~~, for others this~~ is ~~a setting~~ (~~mode/profile~~) of the pedal.
	* AirTurn App Direct - these are pedals that can ~~be connected directly to~~ the ~~App~~. So the ~~connection~~ is ~~made inside the Foot Pedal Settings, see below~~.		The foot pedal settings inside MusicReader are shown in '''Image 1''':
			*With '''(1)''' and '''(2)''' you can set the pedal support to Normal Pedal (HID) or AirTurn App Direct. After doing that you press "Connect Pedal" '''(3)''' for connecting the foot pedal.
			*After you have connected the pedal be sure to set the right number of pedals. '''(4)''' This makes sure you have the right number of actions available.
			*Then you can select the actions for the pedals '''(5) (6)'''. By default they are set to page turning.
			*Last available settings is Pedal Block Time. '''(7)''' This setting is to pevent accidental double triggers. To do this the pedal is blocked for a short time after you press. Here you can set the time for that. If you set it to 0 then the block is turned off.

MRWikiAdmin: Created page with "MusicReader has foot pedal support for page turning and many other actions. By default foot pedals trigger page turns in MusicReader, both forward and backwards. MusicReade..."

2022-04-15T09:53:38Z

Created page with "MusicReader has foot pedal support for page turning and many other actions. By default foot pedals trigger page turns in MusicReader, both forward and backwards. MusicReade..."

New page

MusicReader has foot pedal support for page turning and many other actions.

By default foot pedals trigger page turns in MusicReader, both forward and backwards.

MusicReader supports two types of foot pedals:

* Keyboard / HID based foot pedals. These send arrow () or page up/down keys of your keyboard and are connected using the Bluetooth settings of your system. Most pedals support this by default, for others this is a setting (mode/profile) of the pedal.
* AirTurn App Direct - these are pedals that can be connected directly to the App. So the connection is made inside the Foot Pedal Settings, see below.