Foot Pedal Settings

MusicReader has foot pedal support for page turning and many other actions.

By default foot pedals trigger page turns in MusicReader, both forward and backwards.

In MusicReader both USB and Bluetooth foot pedals are supported.

There are two ways that foot pedals can be used:

Image 1 - Foot Pedal Settings

Connected in the Bluetooth settings of your system or connected to USB port. This depends on the pedal, so check which is supported. For these pedals you need to make sure they are in the right mode:
- On iOS and Android we recommend to use mode that sends arrow keys (←↑→↓) as a keyboard. Most cases this is called iOS/Android or page up/down mode. Check the manual of the pedal to be sure which mode / profile it is. Important! On iOS this is always the only mode that will work.
- For Windows and Mac OS you can use both arrow keys (←↑→↓) mode and page-up/down mode. Check the manual of the pedal to be sure which mode send these keys.
For AirTurn Pedals you can also you App Direct (GATT) mode. If you pedal is in this mode then you can connect it using the Foot Pedal Settings inside MusicReader.

The foot pedal settings inside MusicReader are shown in Image 1:

With 1 and 2 you can set the pedal support to Normal Pedal (HID) or AirTurn App Direct. After doing that you press "Connect Pedal" 3 for connecting the foot pedal.
After you have connected the pedal be sure to set the right number of pedals. 4 This makes sure you have the right number of actions available.
Then you can select the actions for the pedals 5 6. By default they are set to page turning.
Last available settings is Pedal Block Time. 7 This setting is to pevent accidental double triggers. To do this the pedal is blocked for a short time after you press. Here you can set the time for that. If you set it to 0 then the block is turned off.